Blinds Internal

Era Inn Action S AC

For indoor blinds, with electronic limit switch

Tubular motor with electronic limit switch.

Minimum vibrations and silent operation for maximum acoustic comfort. Noise 35 dBA.

Perfect alignment between the blinds, even with multiple installations with blinds of the same size: constant motor rotation speed in all load conditions

Possibility to activate the obstacle detection function when both opening and closing.

Acoustic and visual comfort Electronically controlled Soft Start and Soft Stop functions: preset acceleration and deceleration levels in the sections near the limit switches

Facilitated programming thanks to the twocolour diagnostic LED.

Energy savings Low consumption both during motor operation and in standby (<0.5 W).

Practical 1.5 m long cable with connector to simplify installation and maintenance.

Extended operation without the risk of overheating.

EraInnEdgeS AC BD

• For indoor blinds, with built-in bidirectional radio receiver
• Tubular motor with electronic limit switch, practical dry contact input and built-in bidirectional radio receiver.
• Smart The Nice bidirectional radio protocol enables confirmation of correct reception of the command by the automation and the possibility of checking the position of the indoor blind.
• As it also supports the Nice mesh network function, the motor can route the radio command, thus extending the radio range of the system.
• Minimum vibrations and silent operation for maximum acoustic comfort. Noise 35 dBA.
• Perfect alignment between the blinds, even with multiple installations: constant motor rotation speed in all load conditions and the possibility of setting the duration of up and down movements.
• Possibility of activating the obstacle detection function during both opening and closing.
• Adjustable up and down speed.
• Compatible with commercially available dry contact systems.
• Simple installation Each motor can be programmed individually, without needing to power off the other motors in the same system
• Via radio, using Nice transmitters or the TTPRO BD palmtop programmer.
• Via a wired connection, using the TTPRO palmtop programmer.
• Acoustic and visual comfort Electronically controlled Soft Start and Soft Stop functions allow different acceleration and deceleration levels to be set in the sections near the limit switches.
• Facilitated programming thanks to the twocolour diagnostic LED.
• Energy saving Low consumption both during motor operation and in standby (<0.5 W).
• Extended operation without the risk of overheating.

EraInnEdgeS DC BD

• Tubular motor with electronic limit switch, practical dry contact input and built-in bidirectional radio receiver.
• Smart The Nice bidirectional radio protocol enables confirmation of correct reception of the command by the automation and the possibility of checking the position of the indoor blind.
• As it also supports the Nice mesh network function, the motor can route the radio command, thus extending the radio range of the system.
• Minimum vibrations and silent operation for maximum acoustic comfort. Noise 35 dBA.
• Perfect alignment between the blinds, even with multiple installations: constant motor rotation speed in all load conditions and the possibility of setting the duration of up and down movements.
• Possibility of activating the obstacle detection function during both opening and closing.
• Thanks to its compact dimensions, the motor can be installed in even the smallest of spaces.
• Adjustable up and down speed.
• Compatible with commercially available dry contact systems.

Era Inn SmartS AC

• Integration with Building Automation systems
• Tubular motor with electronic limit switch, practical dry contact and BusT4 inputs on the motor head.
• Minimum vibrations and silent operation for maximum acoustic comfort. Noise 35 dBA.
• Perfect alignment between the blinds, even with multiple installations: constant motor rotation speed in all load conditions and the possibility of setting up and down movement durations.
• Possibility to activate the obstacle detection function when both opening and closing.
• Adjustable up and down speed
• Compatible with KNX and the protocols most widely used in the building automation sector via the DMKNX and DMBM modules.
• Compatible with commercially available dry contact systems.

Era Inn SmartS DC

• Integration with Building Automation systems
• Tubular motor with electronic limit switch, practical dry contact and BusT4 inputs on the motor head.
• Minimum vibrations and silent operation for maximum acoustic comfort. Noise 35 dBA.
• Perfect alignment between the blinds, even with multiple installations: constant motor rotation speed in all load conditions and the possibility of setting up and down movement durations.
• Possibility to activate the obstacle detection function when both opening and closing.
• Adjustable up and down speed.
• Compatible with KNX and the protocols most widely used in the building automation sector via the DMKNX and DMBM modules.
• Compatible with commercially available dry contact systems.

Era Inn Edge S Li-ion

• For interior roller blinds – with integrated rechargeable battery, electronic limit switch and built-in radio receiver.
• Obstacle detection while opening and closing.
• Perfect blind alignment, even with multiple installations: constant motor speed under all load conditions allows Era Li-ion to be the only battery motor with perfect hembar alignment every time.
• LED status lights indicate battery state of charge and diagnostics.
• Go To Position function: simply touch the desired position on the touchbar of a compatible transmitter to move the blinds to this position. Available with the Nice remote controls P1V and P6SV
• Constant speed up/down
• Adjustable open and close speed via touchbar slider.
• Electronically controlled Soft Start and Soft Stop functions enables Smooth Move technology
• On/Off switch makes programming multiple motors simple.

EraInnActionM AC

• For indoor blinds, with electronic limit switch
• Tubular motor with electronic limit switch.
• Minimum vibrations and silent operation for maximum acoustic comfort. Noise 33 dBA.
• Perfect alignment between the blinds, even with multiple installations with blinds of the same size: constant motor rotation speed in all load conditions.
• Possibility to activate the obstacle detection function when both opening and closing.
• Acoustic and visual comfort Electronically controlled Soft Start and Soft Stop functions: preset acceleration and deceleration levels in the sections near the limit switches.
• Facilitated programming thanks to the twocolour diagnostic LED.
• Energy saving Low consumption both during motor operation and in standby (<0.5 W).
• Practical 1.5 m long cable with connector to simplify installation and maintenance.
• Extended operation without the risk of overheating.

EraInnEdgeM AC BD

For indoor blinds, with built-in bidirectional radio receiver

Tubular motor with electronic limit switch, practical dry contact input and built-in bidirectional radio receiver.

Smart The Nice bidirectional radio protocol enables confirmation of correct reception of the command by the automation and the possibility of checking the position of the indoor blind.

As it also supports the Nice mesh network function, the motor can route the radio command, thus extending the radio range of the system.

Minimum vibrations and silent operation for maximum acoustic comfort. Noise 33 dBA.

Perfect alignment between the blinds, even with multiple installations: constant motor rotation speed in all load conditions and the possibility of setting the duration of up and down movements.

Possibility of activating the obstacle detection function during both opening and closing.

Adjustable up and down speed.

Compatible with commercially available dry contact systems.

EraInnEdgeM DC BD

• For indoor blinds, with built-in bidirectional radio receiver
• Tubular motor with electronic limit switch, practical dry contact input and built-in bidirectional radio receiver.
• Smart The Nice bidirectional radio protocol enables confirmation of correct reception of the command by the automation and the possibility of checking the position of the indoor blind.
• As it also supports the Nice mesh network function, the motor can route the radio command, thus extending the radio range of the system.
• Minimum vibrations and silent operation for maximum acoustic comfort. Noise 33 dBA.
• Perfect alignment between the blinds, even with multiple installations: constant motor rotation speed in all load conditions and the possibility of setting the duration of up and down movements.
• Possibility of activating the obstacle detection function during both opening and closing. Thanks to its compact dimensions, the motor can be installed in even the smallest of spaces.
• Adjustable up and down speed.
• Compatible with commercially available dry contact systems.

Era Inn SmartM AC

• Integration with Building Automation systems
• Tubular motor with electronic limit switch, practical dry contact and BusT4 inputs on the motor head.
• Minimum vibrations and silent operation for maximum acoustic comfort. Noise 33 dBA.
• Perfect alignment between the blinds, even with multiple installations: constant motor rotation speed in all load conditions and the possibility of setting up and down movement durations.
• Possibility to activate the obstacle detection function when both opening and closing.
• Adjustable up and down speed.
• Compatible with KNX and the protocols most widely used in the building automation sector via the DMKNX and DMBM modules.
• Compatible with commercially available dry contact systems.

Era Inn SmartM DC

• Tubular motor with electronic limit switch, practical dry contact and BusT4 inputs on the motor head.
• Minimum vibrations and silent operation for maximum acoustic comfort. Noise 35 dBA.
• Perfect alignment between the blinds, even with multiple installations: constant motor rotation speed in all load conditions and the possibility of setting up and down movement durations.
• Possibility to activate the obstacle detection function when both opening and closing.
• Adjustable up and down speed.
• Compatible with KNX and the protocols most widely used in the building automation sector via the DMKNX and DMBM modules.
• Compatible with commercially available dry contact systems.

Blinds External

EraS

• EraS With mechanical limit switch
• Tubular motor with mechanical limit switch.
• Particularly suitable for compact installations: useful length 402 mm, for motors up to 10 Nm torque.
• Ideal in environments where the noise level must be reduced to a minimum.
• Intuitive adjustment of up and down limit positions, thanks to the mechanical limit switch.
• Easy to install thanks to the new compact support and innovative click system to fasten the drive wheel.
• Wired and/or radio connection to climatic sensors via external control units.
• Time saving and simple electrical connections; thanks to the double insulation, the motor does not need an earth wire.

Era MatST

• With electronic limit switch, built-in receiver and Nice TTBus technology
• Tubular motor with electronic limit switch, built-in receiver and Nice TTBus technology.
• Simple remote adjustment of the limit switch by transmitter or with the O-View TT and TTPRO external programming units in automatic, semi-automatic or manual mode.Useful feedback through movement of the blind.
• Level programming: quick and safe. Thanks to this function, there are a number of possible settings. If an incorrect selection is made, programming begins again from the previous level
  without the need to reprogramme all the settings programmed up to that point.
• Memory locking to prevent accidental memorising.
• Adjustment of a number of intermediate opening positions.
• Thanks to Nice TTBus 3-wire technology, motor movement can be managed by means of a low-voltage control; simple and intuitive wired connection to climatic sensors without external control
  units and/or via radio.
• The built-in circuit board allows a number of motors to be connected and controlled in parallel from a single point without the need for additional control units.
• The encoder technology guarantees millimetric precision, reliability and maintenance of set values over time.

Era M

With mechanical limit switch

Tubular motor with mechanical limit switch.

Suitable for both large-scale applications with the 50 Nm 12 rpm version and small structures with the high speed 4 Nm 26 rpm version.

Particularly suitable for compact installations: useful length 426 mm.

Intuitive adjustment of up and down limit positions, thanks to the mechanical limit switch.

Easy to install thanks to the new compact support and innovative click system to fasten the drive wheel.

Wired and/or radio connection to climatic sensors via external control units.